Where is Cosine based and what areas do you cover?

Cosine Electrical is based at Waerenga in the North Waikato, between Te Kauwhata and Morrinsville. We cover the wider Waikato and South Auckland — from Manukau down to Te Awamutu, east to Thames, west to Raglan. Drive times from Waerenga: Hamilton 30-40 minutes, Cambridge 40 minutes, Pukekohe 30 minutes, Manukau 45 minutes, Raglan 75 minutes, Thames 60 minutes.

What is the digger operator on the crew thing?

Most electricians sub-contract digging for underground work — second contractor, second quote, second site visit. Cosine has a skilled digger operator on the crew, so for underground jobs we trench our own runs. One quote, one team, one site visit. Note: Cosine is not a registered drainlayer. Wastewater and stormwater scope sits with a licensed drainlayer.

How quickly do you get back with a quote?

Within 24 hours of the site visit. Itemised, in writing, valid 30 days. For smaller jobs we can often give a rough indication over the phone if you text photos of the existing setup.

What does a switchboard upgrade cost?

A straight switchboard upgrade in an average three-bedroom Waikato house is typically $1,500-$2,500 plus GST for board and labour. Push-ups: old cable failing insulation tests, mains upgrade needed (lines company involvement), asbestos in the meter-box backing board common in 60s and 70s houses. Everything flagged in the written quote — no surprises on the invoice.

What does an EV charger install cost?

Standard install with the existing switchboard up to spec is $1,200-$1,800 plus GST plus the charger. Older home needing a board upgrade adds $1,500-$2,500. Long trenched runs to a detached garage on a lifestyle block typically $2,500-$4,500 all-in.

Do you do compliance testing for landlords?

Yes — landlord WOF-equivalent inspections, RCD function tests, written reports with photos and plain-English findings. Insurance-ready paperwork.

Do you work with builders on renovations?

Yes — preferred sparky for several builders across Hamilton, Cambridge and Pukekohe. We walk through with the homeowner and builder before quoting, mark up the plans, and work to the builder's schedule. We don't hold up the next trade.

Can you handle commercial maintenance for property managers?

Yes — scheduled maintenance contracts, emergency callouts, fault-finding, compliance reporting. One number, one paperwork system, no padded packages and no lock-ins.

Do you certify the work?

Always. Every new circuit and every board upgrade gets a Certificate of Compliance emailed through within a day of the job finishing. Required for insurance, future sale and any audit.

What if you cannot fix a fault in one visit?

Some faults like earth leakage on a circuit shared by multiple cables genuinely need a second visit. Day 1 we isolate the faulty section onto its own RCBO so the rest of the house keeps power. Day 2 we test and replace the bad section. We don't punch holes in walls to brute-force the search.

EV Charger Install in Thames — What You Need to Know

sp8002

Jun 18

1 min read

EV Charger Install in Thames — What You Need to Know

Call Kris on 021 466 666

Thames has a unique EV install profile combining heritage gold-mining-era housing in the town centre with a long ribbon of coastal bach properties down the Te Puru / Tararu coast.

What an EV charger install actually involves

Switchboard check — capacity, spare position, RCD compliance.
Dedicated circuit run — 6mm or 10mm cable.
Mount and connect the charger — corrosion-rated enclosure for coastal sites.
Test, certify and demo — Certificate of Compliance issued.

What's specific to Thames EV charger installs

Heritage central Thames homes (Pollen Street, Mary Street). Most have 1900s wiring with switchboards from the 60s-70s. EV installs almost always start with a switchboard lift, sometimes mains upgrade too.
Coastal bach properties (Te Puru, Tararu, Thames-Tapu Coast Road). Salt corrosion is the constant. Marine-grade or corrosion-rated enclosures default. Many owned by absentee families — we quote off photos.
Newer residential and Kauaeranga Valley homes. Standard installs.
Bach owners adding EV chargers for occasional use — we spec with a scheduler for off-peak charging.
The Coromandel travel pattern. Many Thames EV owners run up the peninsula regularly.

The charger options

Tesla Wall Connector (metal housing tolerates salt better), Wallbox Pulsar Plus (IP65), EVnex (NZ support), Zappi (solar setups).

What it costs

Simple modern-home install $1,500-$2,200 plus charger. Heritage central Thames (switchboard plus EV) $3,500-$5,500 all-in plus charger. Coastal bach with marine-grade enclosure $2,500-$4,000 plus charger. Long trenched run adds $1,000-$2,000.

Call Kris on 021 466 666

For absentee bach owners: photos of the switchboard, meter box, and where the charger should go are enough.

EV Charger Install in Thames — What You Need to Know

EV Charger Install in Thames — What You Need to Know

What an EV charger install actually involves

What's specific to Thames EV charger installs

The charger options

What it costs

Call Kris on 021 466 666

Recent Posts

Comments