top of page

EV Charger Install in Morrinsville — What You Need to Know

Kris Goff
Jun 18
1 min read

EV Charger Install in Morrinsville — What You Need to Know

Call Kris on 021 466 666

Morrinsville is on the slower end of EV adoption compared to Cambridge or Hamilton, but the lifestyle blocks across the dairy belt (Tahuna, Walton, Tatuanui, Waitoa) are starting to add EV chargers.

What an EV charger install actually involves

  • Switchboard assessment — capacity, spare position, RCD compliance.

  • Dedicated circuit in 6mm or 10mm cable.

  • Mount and connect the charger.

  • Test, certify and demo — Certificate of Compliance issued.

What's specific to Morrinsville EV charger installs

  • Lifestyle block installs dominate. Many Morrinsville EV jobs end up running cable from house to a detached garage or shed — often 50+ metres of trench across an open paddock. We trench our own runs.

  • Dairy-shed three-phase. Some lifestyle properties have three-phase supply already running to a dairy shed.

  • Older town central housing. The streets around Studholme and Thames Street have a lot of post-war housing with original switchboards.

  • Sub-mains to existing outbuildings. Common: shed already has a sub-board, EV charger goes onto that sub-board.

  • Practical pricing matters. We scope what's needed.

The charger options

Tesla Wall Connector, EVnex, Wallbox Pulsar Plus, Schneider EVlink.

What it costs

Simple in-town install $1,200-$1,800 plus charger. Older home needing a board lift adds $1,500-$2,500. Lifestyle-block install with a long paddock trench typically $2,500-$4,500 all-in.

Call Kris on 021 466 666

Photos of the switchboard, the charger location, and the cable route are enough for a rough quote.

Recent Posts

See All

Comments


bottom of page